Product Description
High-quality front strut bar brace for BMW E30 M20/M40 IS 4 cylinder models. It is also suitable for all 1.6 L, 1.8 L, 1.8 L IS and if you have installed the 1.8 L IS engine from the BMW E36 in your E30. It provides more stability and improved steering as well as sustainable stiffening of the body. Drift-King strut bars are MIG MAG welded and CNC bent and cut. The strut bars are powder-coated in black. The main profile dimensions are 40mm x 20mm with a thickness of 3mm. These strut braces do not require an ABE and are free of registration. An ABE is only required if the strut brace has to be welded to the body. Drift-King strut braces are screwed on and therefore neither an entry nor an ABE is necessary. Strut braces serve to stiffen the body. Strut braces are usually retrofitted to increase the strength of the body. In particular, if changes have been made to the chassis and there is a higher load on the body, the installation of a strut brace is useful. A strut brace connects the two front or rear strut domes with one another. This prevents the geometry of the chassis from changing. The aim is to improve driving behavior, especially when cornering, and to stabilize it. Quality product from Hamburg.